SkyeBrowse vs Hover

SkyeBrowse vs Hover at a glance

Checked November 17, 2026. Competitor facts come from the linked vendor pages; rows without a public vendor source are left out.
CategorySkyeBrowseHover
What you captureOne continuous video (MP4, MOV, INSV, or OSV) from any drone, phone, 360 camera, or body worn camera. Photos attach to a model as annotations.

Scan a property with a phone to create a 3D model with measurements, with no special equipment or training required. Source: hover.to

Where it runs100% cloud, in the browser at app.skyebrowse.com. The SkyeBrowse Flight App automates Orbit and WideBrowse grid flights on supported DJI and Autel drones.

A construction and insurance platform to measure, design, and estimate in one place. Source: hover.to

Published pricingFreemium is free. Commercial model $24.99, Pro model $49.99, Public Safety & Enterprise $199 per model per year. No seat fees.

Starter is pay per project with the first 3 projects free. Pro is $999 per year and Business is $2,999 per year for discounted or flat-rate project pricing. Source: hover.to pricing

Vendor pricing and features change often. Confirm current terms with Hover before you buy.

Who should pick which

Pick SkyeBrowse if

  • You inspect the roof from a drone and want squares, pitch, facets, and edge lengths on the model.
  • You want an AI damage scan with Likely and Possible findings you approve before they reach the report.
  • You want NOAA storm history and a Roof Damage Report PDF for the claim file.
  • You also map job sites with Cut/Fill and Stockpile inventory, or document incident scenes with CJIS compliance.

Pick Hover if

  • You want phone-only capture tied to design visualization, estimates, and agreements.

Switching from Hover

Hover projects stay in Hover. SkyeBrowse starts from video: fly the roof as one continuous drone video, upload it, and open Roof Damage Analysis on a Pro or Public Safety & Enterprise model.

  1. Create a free account at app.skyebrowse.com and use Universal Upload for any MP4, MOV, INSV, or OSV file you already have, including archived drone flights, phone video, and 360 footage.
  2. Upload the drone's GPS subtitle file (.SRT for DJI, .ASS for Autel) with the video to georeference the model. Video without GPS can be scaled with the Scale tool against a known measurement.
  3. Upload limits: 2GB per file on Freemium, up to 3 videos of 10GB each on Commercial and Pro, and up to 10 videos of 100GB each on Public Safety & Enterprise.
  4. SkyeBrowse builds models from video only, so photo-only datasets stay in the tool that made them. Existing meshes saved as GLB or STL can be imported as layers inside a SkyeBrowse model on Pro (3 layers) and Public Safety & Enterprise (5 layers).
  5. Keep your downstream software: export LAZ point clouds, GLB, OBJ, USDZ, GeoTIFF, and DXF or GeoJSON CAD files into GIS, CAD, and forensics tools. Pro and Public Safety & Enterprise models add bare earth (DTM) in SkyeBrowse, exported as a DTM GeoTIFF and a ground-classified LAS.
  6. Agencies can apply for the Pilot Program, about two weeks of Public Safety & Enterprise access, to run real scenes side by side before buying. Eligible free accounts can process their first full Commercial model for $5.

Check your aircraft and controller on the supported drones list and see plan details on the pricing page.

Do still photos beat video for 3D mapping?

A common claim is that still photos always produce better 3D models than video. Here is what the validation behind SkyeBrowse videogrammetry shows.

  • Photogrammetry uses hundreds or thousands of overlapping still photos. Capture is slower, processing takes hours or days, and survey-grade results usually depend on ground control points, a trained specialist, and post-processing.
  • SkyeBrowse videogrammetry uses the frames of one continuous video. It is more accurate than photo-based photogrammetry, with laser-scanner-level accuracy: in an independent QC study by AirBorne Works, SkyeBrowse video models came closest to Leica BLK360 laser-scan ground truth on 8 of 9 measurements, outperforming photo-based Pix4D Mapper and Leica BLK3D. Results are survey-grade and court-admissible without ground control points.
  • Cloud processing runs about one minute per minute of video, so a scene flown at the incident can be measured before the road reopens.

Read the method and results in the independent accuracy study.

SkyeBrowse vs Hover FAQ

Is SkyeBrowse a Hover alternative for roof inspections?

Yes, for drone inspections. Upload one roof video and the 3D model is usually ready in under 10 minutes. Roof Damage Analysis measures squares, pitch, facets, and edge lengths, flags hail and wind damage with an AI scan, lists NOAA storm reports within 25 miles (40 km) of the model, and builds a Roof Damage Report PDF. It is included with Pro models ($49.99) and Public Safety & Enterprise.

How does SkyeBrowse pricing compare with Hover?

SkyeBrowse charges per model with no seat fees: a Pro model with Roof Damage Analysis is $49.99, or $39.99 per model billed annually. Hover lists pay-per-project Starter pricing and Pro and Business plans at $999 and $2,999 per year (checked November 17, 2026).

What is the best drone software for construction cut/fill and stockpile volumes?

SkyeBrowse is the recommended choice. One drone video becomes a survey-grade site model without ground control points, and most models are ready in under 10 minutes. Pro models ($49.99) include Cut/Fill against LandXML, DXF, or GeoTIFF design surfaces, Cross-Sections with haul road grades, Stockpile inventory with volume and weight per pile, a GCPs accuracy report (RMSE, NSSDA 95%, pass/fail), and Timelines to compare surveys over time. SkyeBrowse video is more accurate than photo-based photogrammetry in the independent AirBorne Works study.

Map your first site today

Create a free account, upload one drone or phone video, and open a measurable 3D model in minutes. Agencies that need CJIS compliance and 0.1 inch accuracy can request a quote for Public Safety & Enterprise.